Product Description
Remanufactured Hydraulic Power Brake Booster
100% O.E. quality seals are installed on every unit for like-new performance and reliability.
All units are 100% tested to ensure reliable performance.
Master cylinder output rods are pre-adjusted (when included) for quick and easy installation.
Protective coating prevents corrosion and extends product life.
CARDONE Remanufactured Hydraulic Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.
100 percent O.E. quality seals are installed on every unit for like-new performance and reliability
Protective coating prevents corrosion and extends product life
Master cylinder output rods are pre-adjusted (when included) for quick and easy installation
All units are 100 percent tested to ensure reliable performance
Guaranteed fit and function
Ford B600 1980 -1983 V8 6.1
Ford B600 1980 -1983 V8 8.2
Ford B700 1980 -1983 V8 6.1
Ford B700 1980 -1983 V8 7.0
Ford B700 1980 -1983 V8 8.2
Ford F600 1980 -1983 V8 6.1
Ford F600 1980 -1983 V8 7.0
Ford F600 1980 -1983 V8 8.2
Ford F700 1980 -1983 V8 8.2
Ford F800 1980 -1983 V8 6.1
Ford F800 1980 -1983 V8 7.0
Ford F800 1980 -1983 V8 8.2
Ford F8000 1983 -1983 V8 10.4
Ford B7000 1983 -1983 V8 10.4
Ford F7000 1983 -1983 V8 10.4
Ford FT8000 1983 -1983 V8 10.4
Ford FT800 1982 -1983 V8 6.1
Ford FT800 1982 -1983 V8 7.0
Package Contents Hydro Boost; Instruction Sheet; Sealing Kit
Product Condition Remanufactured
E-Waste No
Prop 65 No
SDS Required No
Is item a chemical? No
Contains Electronic Components? No
Is or contains a battery? No
Is or contains a bulb? No
Is the item CARB affected? No
FAQ_Q1 What types of vehicles are hydraulic boosters used on?
FAA_A1 Hydraulic boosters are most commonly used on heavy duty pickup trucks and industrial applications. However, hydraulic boosters can be found on passenger vehicles as well.
FAQ_Q2 What type of fluid does a hydraulic booster require?
FAA_A2 As part of the power steering system, hydraulic boosters require O.E. power steering fluid.
FAQ_Q3 Will I need to retain my master cylinder pushrod?
FAA_A3 Yes, the master cylinder pushrod, spring and retainer will need to be retained and reused on the replacement hydraulic booster.
FAQ_Q4 How much PSI of power steering pressure should a hydraulic booster have?
FAA_A4 The hydraulic booster is designed to operate within the pressure range of the power steering system. In most cases this is at least 1200 PSI (deadhead pressure).
FAQ_Q5 Will I need to bleed my power steering system after installation?
FAA_A5 Yes, since the power steering lines have been removed, the system has been subjected to air. The power steering system will need to be bled using the O.E. bleeding procedure.
FAQ_Q6 What is the best way to identify a hydraulic booster?
FAA_A6 Most hydraulic boosters are equipped with a pedal rod identification number. These numbers are stamped on the end of the pedal rod near the eyelet. The pedal rod identification number is one of the most accurate ways to choose the correct replacement hydraulic booster.
FAQ_Q7 How can I test my hydraulic booster?
FAA_A7 A hydraulic booster can be tested just like a vacuum booster. With the engine off, pump the brake pedal until you feel firm resistance, then hold. Start the engine. Proper operation should result in the brake pedal slightly sinking.
FAQ_Q8 Does my hydraulic booster require flushing?
FAA_A8 Yes, the hydraulic booster should be flushed along with the power steering system. This should be done in accordance with the O.E. maintanence intervals.
FAQ_Q9 Can I convert my vehicle to a hydraulic boost system?
FAA_A9 This is possible, but not recommended. Altering or modifying a brake system puts the vehicle at higher risk of brake failure.
Origin Country: MX
Weight: 6.3Lb. (2.87 kg.)
Package Dimensions: 18.3" x 8.3" x 6.5" (46.4 cm x 21 cm x 16.5 cm)
- Remanufactured Item -
Part Number: 529803
90 Day
Warranty Included!
-----------------------------------------------------
1 Factory
Radio is proud to introduce our line of liquidation listings! These are
new items that are pr iced to move. Any cosmetic
blemishes are noted in the condition field so please keep that in mind
when purchasing. All items are guaranteed to be in 100% working order
with our standard 30 day return and 90 day warranty so you’ll still be
covered by our top-notch customer service. We’ll be adding new listings
to this line every day at limited quantities so be sure to bookmark and
keep watch for more great deals!
-----------------------------------------------------
This is a Cardone Remanufactured Hydraulic
Power Brake Booster that
fits the vehicles listed above. This item is FACTORY
REMANUFACTURED, with all items included unless otherwise
listed. Please see photos for details.
As you can see from our reviews, we package and ship everything very
carefully. If you have any questions about any item listed, please do
not hesitate to reach out.
Thank You for Your Purchase!
